1.
Read the instructions carefully before use the machine. The
instructions should be kept properly so that they can be read at
any time.
2.
Keep workplace clean and sufficient lighting.
3.
DO NOT let children or other irrelevant personnel access.
4.
DO NOT alter it privately.
5.
DO NOT wear too loose clothing or jewelry to work, because it
may be entangled in high-speed rotating parts.
6.
Use safety glasses and hearing protection devices. Dust
respirators should be worn when wood chips are large and dust.
7.
DO NOT drag the wire to move the tool, or yank the wire to pull
the plug. Avoid exposing wires to hot objects and sharp edges to
avoid contaminating the wires.
8.
The machine should be placed smoothly, not shaken or easily
dumped.
9.
Disconnect wire plugs when tools are not used, or when cleaning,
maintaining, replacing parts, and changing tools.
10.
Directly grasp too small workpiece grinding with his bare hands,
hands are too close to the sand disc, abrasive belt and
artifacts could cause serious damage.
11.
When you leave the work area, shut off the switch and disconnect
tools and the power connection.
