Industrial Air Conditioner

Feature:

Adopting high-quality aluminum blades with strong wind power, uniform airflow, and low noise.

BIG WATER TANK(5L)

This machine is equipped with a water tank that can receive condensate water, making it easy to see the amount of water and discharge it in a timely manner.　

The filter screen has been thickened and upgraded with enhanced materials to effectively prevent dust from entering.

1. Simple Operation. 
2. High-efficiency performance 
3. Simple operation, long service life, high efficiency, power save
4. Simple and easy installation.
5.Filters dust and dehumidifies.
6.Great for times when temporary cooling is needed.
7.Caster wheels allow for easy transport and relocation.
8. With pulleys, light and flexible.
9. Large air volume, strong refrigeration, low energy consumption, low noise, long life and stable operation.
10. Using R410A refrigerant, the temperature is comfortable.
11. The compressor can be used for refrigeration in a high temperature environment of 45℃.
　

1. This product is industrial cooling and air-conditioning equipment, not a houseware.

2. This product is a local cooling air-conditioning equipment. The cooling and heat dissipation are on the same machine, which is different from the traditional household split air conditioner.

This machine cannot cool the whole space (if the whole space needs to be cooled down, it is necessary to install pvc hose or aluminum foil single tube at the hot air outlet to discharge the hot air outside,this model needs to choose a 20cm size hose)

3. The design and use environment of this product is 18-45℃. If the temperature is lower than or higher than this temperature zone, the equipment will not operate normally, not the product itself is malfunctioning.

4. The noise of this product is 60-70 decibels, which is not suitable for occasions that require noise (such as bedrooms, meeting rooms, offices, libraries, etc.).

2.Equipment Installation Operation: When installing the elbow pipe, align the convex part of the elbow with the concave part of the cold air outlet tube seat on the machine, insert it, and rotate it counterclockwise until a "click" sound is heard. When installing the cold air pipe, align the convex part of one end of the cold air pipe with the concave part of the elbow mouth, insert it, and rotate it to the left until it is in place. When installing the hot air vent, insert it into the heat exhaust port and ensure it is installed firmly. If it is necessary to extend heat exhaust, an extension pipe can be installed; ask a professional to open a hole on the wall to ensure the heat exhaust pipe is unobstructed.

3.Pre-use Inspection and Adjustment: Check whether the distance between the left and right sides of the machine and the wall or other barriers is more than 50cm, the distance between the cold air pipe and barriers is more than 30cm, and the distance between the heat exhaust outlet and the roof or barriers is more than 200cm. Confirm that the machine is placed on a flat surface and that the brake device of the casters is adjusted to the locked state. Adjust the air outlet direction of the cold air pipe and the hot air pipe; when adjusting the air outlet angle of the cold air pipe, hold the elbow pipe to adjust, and do not directly hold the cold air pipe for adjustment.

4.Start-up and Operation: Turn on the power; the power switch indicator light will be on, and the machine can be turned on and off via the rotary knob. Rotate the knob to select either strong or weak air volume. During use, ensure the ambient temperature is within the range of 18℃-45℃; do not move the machine while it is running, and do not put limbs or any objects into the machine or its air outlet.

5.Abnormal Handling During Operation: If abnormal conditions such as shutdown, excessive noise, vibration, or peculiar smell occur during use, stop using the machine immediately.

6.Storage for Long-term Non-use: If the machine will not be used for a long time, first cut off the power, pour out the condensed water in the water tank, and store the machine after it is dry. Do not store the machine horizontally or upside down; avoid storing it in places with high temperature, rain exposure, or direct sunlight, and keep it out of the reach of children.

You can make order with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.