Fully Automatic Concrete Wall Cutter Cutting Machine 220V 023514

Fully Automatic Concrete Wall Cutter Cutting Machine 220V

Product Overview

The wall cutting machine is mainly used for construction or old building transformation, reinforcement, design change, etc., can cut door holes, windows or elevator and other large-area wall cutting. The structure is non-destructive and formed once, which can avoid the damage caused by the traditional master knocking on the building structure, save material resources, manpower, time and costs.

The wall cutting machine uses a heavy industry grade double-insulation high power motor and reducer, ensuring the low failure rate and long service life, and saving the maintenance costs. The special mechanical clutch protection device effectively prevents the damage to the machine and personnel due to misoperation. In addition to improving the construction quality and increasing the construction speed, the fully automatic cutting machine also greatly reduces the labor intensity of the operator.

The automatic wall cutting machine achieves automatic feeding and automatic cutting (that is, the track is automatic, the feeding is also automatic), is easy to operate and more labor-saving, and has higher safety.

Product Parameters

Model	OB-1200DW
Maximum cutting depth	510mm (20.1in)
Power input	11800W
Voltage	220V single-phase
Speed	310rpm
Net weight	About 125.5kg (276.7LBs)

Attention

1. Installation and fixation of the machine.

After installing the track, saw blade and cover of the main machine, grasp the top of the machine with your hand and shake the machine vigorously from side to side. If the machine shakes, it is necessary to adjust the expansion screw on the track and tighten it with a wrench. Cutting can only be carried out when the machine is not swayed laterally or longitudinally.

2. The interior of the motor should pay attention to waterproofing treatment.

If water exists inside the motor, it will cause electric shock or motor burnout.

3. Cutting must be cooled through the water inlet valve.

Because the overheated saw blade will shorten its life, in the cutting process, please pay attention to supplying water in the inlet valve. In addition, please pay attention to the use of recycled waste water, otherwise it will affect the flow of water, resulting in damage to water seals and other parts.

4. Use a diamond saw blade.

The cutting machine should use diamond saw blades, and other cutting saw blades cannot be used instead of diamond saw blades.

5. Allow the saw blade to fully rotate before starting cutting.

Turn on the switch and wait until the saw blade has fully rotated before starting normal cutting.

6. Do not touch the saw blade in rotation.

Do not touch the saw blade when the saw blade is still rotating. Otherwise, it will cause serious injury and is very dangerous.

7. When operating the machine at heights.

If the machine is operated at a high altitude, please pay attention to selecting a stable and secure location for installation.

8. When the cutting machine is cutting laterally.

Because the machine must use cooling water during operation, it is very dangerous for the main machine motor to be above during horizontal cutting, and vice versa. When the saw blade is above, water will run into the motor, which is very dangerous.

9. When an abnormal phenomenon is found.

In the process of cutting, if the saw blade stops or you hear an abnormal sound, please turn off the switch immediately.

10. Please clean the machine after use.

In order to maintain the service life of the machine, please keep the machine body clean at any time after use.

The machine has no plug, please let a professional electrician connect the power cord to the air switch.

Product Features

Stainless Steel Chuck

The chuck is made of full stainless steel materials, effectively improving the structural strength, durability, wear and corrosion resistance and practicability. Dust prevention can be effectively achieved after water injection operation.　

Saw Blade

The diamond saw blade can be driven to easily cut concrete, stone and other hard materials, achieving the high hardness, wear resistance and adaptability and ensuring the high cutting speed and long service life.

Protective Cover

The protective cover is sturdy and durable, can effectively prevent dust and sewage from splashing during operation and avoids accidents while the saw blade runs. It can remarkably improve the working environment and ensure the clear operation view.

Labor-saving Handwheel

The aluminum wheel disc is firm and durable, the foldable plastic handle adopts the humanized design, saving space, avoiding accidental collision and damage, improving the operation safety and convenience and adapting to different working environments.　

Guide Track

The 1.2m guide track is light in weight and high in load capacity. The track teeth are uniform and firm, facilitating movement of the machine and ensuring the cutting operation is stable and the cutting effect is better.

Controller

The independent control box is designed for controlling the machine body to work, easily achieving start/stop control, feeding/cutting control, speed regulation, direction switching and digital display and ensuring normal operation of the machine.

Operation Method

1. Installation of the machine

Install the track, and then fix the machine on the track. In order to cut the wall surface flatly, the right method to install the track way is: The motor is on the top and the saw web on the lower side. Keep the rotating direction of the saw web against the running direction of the motor. In this case, it cannot reduce the cutting time, but improve the cutting capacity.

2. Cutting instruction

(1) Insert the water pipe into the inlet valve to supply water. Regulate the water and make it abundant on the cutting plane.

(2) Turn on the switch on the control cabinet and the switch of the host machine.

(3) After rotating the cutter handwheel, and start cutting slowly. The saw web move downwards to touch the to-be-cut part. The saw web must move slowly. When cutting to the preset depth, rotate the handwheel to cut. (Then you should turn on the machine’s switches for moving up and down or forward, adjust the speed and make electric cutting.) You can adjust the cutting speed when it cuts into the wall. The cutter must keep a low and uniform velocity when coming into reinforcing steel bars. If it cuts too deep at the beginning, it is excessive work for the machine, which will decrease the cutting speed.

(4) Dissemble the host machine from the track and clean up the working area after cutting.

Product Display

Packing List

Item Number (023514): 1 x Automatic Concrete Wall Cutting Machine 220V

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.