|
|
|
110V
Woodworking Dust-free Hinge Drilling Machine |
 |
| NOTE：Confirm
drill hole size before purchase.
 |
Application:
The machine is mainly for loose
and hinge drilling, work piece positioning plate
vertical and horizontal can be adjusted, convenient and fast to adapt to
the
requirements of drilling.
It is the ideal equipment for door processing and manufacturing factory
of wardrobe
door, kitchen cabinet door, bookcase door and so on.
Description:
This single head woodworking hinge
drilling machine features elegant appearance,
humanized design, simple and convenient operation, flexible, stable and
reliable
drilling operation, high efficiency.
The machine has no tool calibration device, which can ensure the need of
drilling
depth. Three holes in the vertical position can be processed at one
time, including
one big hole for hinge head hole and two for assembly screw hole.
Suitable for
drilling various profiles.
The dust-free hinge drill belongs to the bottom drilling design, and the
debris
generated during drilling is collected in the box to avoid dust flying.
It is
clean and environmentally friendly, and more suitable for environmental
requirements. |
 |
 |
|
Voltage |
110V |
Power |
1500W |
|
Punching Depth |
0-50mm |
Speed |
3400r/min |
|
Drill |
φ35mm*1,φ8mm*2 |
Combined
Drill Model |
45-9.5 |
|
Scale |
39.4″(100cm) |
Air Pressure |
0.6-0.8MPA |
|
Gross
Weight |
229LBS（126kg） |
Package Size |
34.7*34.3*48.4inch(88*87*123cm) |
|
|
Detail: |
 |
 |
Clean Work
Built-in drill for dust-free drilling,the debris generated
during drilling is collected in the box to avoid dust flying. |
Combined Drill
High quality combination drill, drill bit can be changed at any
time. |
 |
 |
Rubber Pressure Plate
Air spring rubber compression device to easily secure the board. |
Scale
The scale control isaccurate to reduce theerror rate. |
 |
 |
Control Panel
Button operation, simple and convenient, with emergency stop
switch, more safe. |
Distribution Box
Flat locked cabinet door for easyopening and closing on both
sides. It is convenient to view the line conditions. And the
internal space is large, allowing for the placement of parts,
tools, etc. |
 |
 |
Foot Switch
Foot switch control machine operation, high sensitivity, stable
and durable, anti-skid wear,free hands. |
Workbench
Thickened and enlarged table, easy to use, ensure success rate. |
 |
 |
Positioning Stop
Adjust the position of the positioning baffle at will according
to the scale as needed. |
Limit Flange
The machining depthcan be adjustedaccurately to improvethe
machining effect. |
|
|
Effect Of
Drilling:
 |
|
Precautions
For Use：
1.Before
starting the equipment, check whether the voltage, oil pump, oil
quantity, etc. are normal, whether the
lubrication is good, and whether the fixture is intact and normal.
2.After
the device is switched on, it must perform the mechanical zero return
operation at first, and then the test run.
The time is 5 minutes, check whether the operation of the machine is
normal, after that everything can
be continued.
3. By
using the calibration knife switch on the control panel, after the drill
bit is raised, the guiding ruler and
positioning pin are fixed through measurement. After repeated
experiments to obtain the accurate position, the
work can begin.
4. The
drill speed should not be too fast, and the drill should be sharp. Too
fast feed speed will cause chip removal
difficulties, cause drilling smoke, hole wall carbonization, and fast
feed speed is more likely to lead to serious
consequences of spindle break.
5. After
working for a period of time, the drilling head slide may be loose, if
not adjusted, it will cause the processed
hole is oval or diagonal hole, and in serious cases, it will cause the
spindle to bend and break. The method is to loosen
the screw fixing the slide seat, adjust the lock screw on the side of
the slide block, so that the drill can not swing back
and forth, up and down, and then it should be locked, but not adjusted
too tight, otherwise the drilling head can not
move smoothly, crawling phenomenon.
6. When
there’s something wrong with this equipment, the operator should handle
it in time. If it can't be handled,
or if the problem is serious, please turn off the power of the equipment
immediately and notify the professional
maintenance personnel to solve the problem.
|
 |
| Item Number: 110V Woodworking
Dust-free Hinge Drilling Machine 027313 |
| |
|
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from
us with low cost. |
|
