|
|
|
220V
Submersible Deep Well water Pump |
|
QJD series pump for deep well is the best
appliance to get water from deep wells. They adopt the most advanced
tehchnology after several years, careful studies made by our
technicians. They are connected with grainless motor and pump. The
pumps have positive and negative formation conductors and other
important parts make a hole body, making them elegant and excellent.
This is for clear
water only, if water is dirty or muddy,may cause motor to shut off. |
|
Specifications:
Input(single phase）: 220V
Cable: 131.2ft
Outlet diameter： 1 inch outlet
Head of delivery: 131ft
Pump into the water: Max. depth 16.4ft (5m)
Rated power: 1HP/0.75kw
Rated
flow: 8.9 GPM at 131ft
Speed: 2850r/min
Frequency: 50Hz |
|
|
Characteristics:
1. Small diameter, light weight, high
flux, strong output and anti-sand quality.
2. Especially our techical innovaton
solves the problem of stabilization of deep well pump quality.
3. Get water from small-diameter wells, farmland mine wells and family
wells.
|
|
|
Applying conditions:
1. Do not make the system in a failure of dry running
condition, it will damage parts and burn motor
2. Minimum internal diameter of well: 4"(102mm).
3. Pumps cannot be frequent started. Too frequent started will
damage the motor
4. Cable should be every 4.9-6.6ft (1.5-2 meters) with plastic
bags tied on the water pipe
5. Sulfureted hydrogen percentage is no more than 1.5mg/L
6. Granularity: Max. 0.0079"(0.2mm)
7. Water temperature：Max.40 °C
8. Pumps must be reliable connected with ground. Ground wire
must not be false connected to power , make well charged
resulted in danger.
9. Pipeline must be reliable sealed, no leak, otherwise flow can
not meet the requirements.
10. After electric pump is right installated,Wells must be good
covered, to prevent unknown items fall into the well pump.
11.Acid and alkali degree: PH 6.5-8.5
|
|
|
|
|
|
|
Item
Included:(144002)
1*Submersible Deep Well water Pump |
|
