|
NOTE:
1,The belt can not be too tight. The belt will be loosen
after adjusting the motor support up.
2, The corns must be enough dry in the sun before use,
otherwise the corn will block the machine.
3,This machine is not fit for sweetcorn.
4,If the machine is stuck by corn, please shut off power
at once and empty the corn, otherwise the motor will be damaged.
Operation steps:
1.
Put the machine upside down in order to install the
engine and the belt.
2.
Check if the screws of key parts are fastened.
3.
After switch on the power supply, let the machine run
blankly for 1-2 min and check if the machine run good.
4.
If the machine is stuck by corn cob: 1, the belt is too
loose. (You need to fasten the belt) 2, the corn cob is too big (You
need to add the gasket below the cover)
5.
If some corns still left on the cobs, you need to add the
gaskets below the spindle. |
