|
1. When handling, the box should be kept as
straight as possible, the maximum inclination should not exceed 45 °C,
and it should not be placed upside down or horizontally;
2. Placement of the freezer: It should be placed in
an environment with smooth air, cool and dry, and no corrosive gas
around it. Remember to be close to the heat source and avoid direct
sunlight. The front and rear of the cabinet should be kept more than
10cm away from the wall. The cabinet is stable to avoid vibration or
excessive noise;
3.When the frost layer inside the box reaches a
thickness of 5mm, it needs to be defrosted. It is prohibited to use
sharp objects to defrost to prevent damage to the inner wall of the box
and the evaporator. Attention: Please cut off the power before
defrosting.
4.Stainless steel boxes are strictly prohibited
from being corroded by chemicals such as acids, alkalis, and salts. It
is not allowed to use cleaning agents with strong chemical properties
during cleaning.
5.To ensure good cooling performance, clean the
dust and debris on the condenser at least twice a month.
6.When cleaning the cabinet, cut off the power
supply and use a soft cloth and neutral cleaning solution to clean the
equipment. It is prohibited to use high-pressure water pipes to flush
the cabinet.
|
