1. The height of the tire disassembly machine is low (specially designed according to the diameter of the tire). It is a bit labor-saving when placing the tire. It can be placed in place with a light push.
2. The motor is pure copper motor.lt is professionally customized for the tire changer. The power reaches 4 kilowatts. The output torque of the motor gearbox is large and the heat output is low.
3. The remote control used in this disassembly machine is an industrial-grade remote control, which is durable.
4. The shovel tire trowel undergoes multiple processes such as cutting, tempering, rough grinding and fine grinding. The shovel tire shovel has high strength and does not deform. The surface smoothness of the shovel head reaches the mirror level. The shovel tire is guaranteed not to hurt the tire mouth.
5. The angle design of the tire loading arm has been simulated by the computer for many times.The design angle is very reasonable, and the tire will not be injured during loading.
6. The design of the tire fixing point is reasonable, and the tire can be fixed only by gently rotating, eliminating the trouble of disassembling and screwing. And saving time.

Parameters:

Voltage: 110V
Motor power: 4KW
Applicable tires: disassembly and assembly of R16 R17-9-19.5 R22.5 all series tires
Rotation speed: 4 times/ min
Controller battery: AAA battery*2 (This unit does not come with batteries.)

Use warning:

1. Before removing the tire and installing the tire, the grease must be evenly applied on the tire mouth, otherwise it will easily hurt the tire mouth.
2. Before tying the tire, use a shovel to shovel the tire mouth, and squeeze the tire rod as flat as possible, so that the shovel head and the steel ring have a gap of o.5 cm.Damage the device.
3. Before starting the tire-pulling operation, the motor should be electrically controlled to rotate the motor slightly in the opposite direction of the tire-pulling (the purpose is to make the tire mouth stretch and not to hurt the tire mouth), and then the tire-pulling operation will be performed.
4. The tire tying machine must not be exposed to rain or blisters, otherwise the motor is prone to circuit failure or burnout.
5. Remember! Before using the tire tying machine, the power supply must be installed with a leakage protector.

Maintenance methods:

1. After using it a few times, be sure to check the tightening of each fixing screw.Each screw must be re-tightened. Regular inspections are required in the future to prevent the screws from loosening and damaging the device.
2. The tire picking device and tire mounting device should be cleaned regularly to prevent rust.
3. The motor and remote control system belong to electrical equipment, pay attention to moisture, and always check whether the environments wet. Prevent electrical equipment from being damaged by moisture.
4. The remote control is afraid of smashing, throwing, falling, or moisture, so pay attention to battery replacement to avoid affecting the use.
5. Maintenance of the machine head: after removing the inner connecting shaft, add grease into it and turn the machine to lubricate the gears.

Item Number:

16" 17.9-19.5" 22.5" truck tire changer electric portable tire changing machine 110V (239921）