|
|
220V
Vibrating concrete table motor vibration plate surface platform
vibrating (300137)
|
|
|
Description
|
|
Coagulated soil vibration
table is mainly composed of bottom frame, vibrator spring and
|
|
other parts, table and bottom frame
are made of steel plate and section steel welding,
|
|
vibration table is an electric motor
and a pair of the same eccentric wheel composition.
|
|
And through a pair of hanger coupling
installed in the center of the table (opposite),
|
|
plays the role of smooth, vertical
direction in the process of vibration and compaction.
|
|
Technical parameters
|
|
Mesa dimension
|
0.5*0.5M (19.6'*19.6')
|
|
Frequency
|
2860 times/min
|
|
Amplitude
|
0.3-0.6 mm
|
|
Amplitude power
|
0.55kw
|
|
Voltage
|
220 v
|
|
Maximum load
|
100KG
|
|
|
Feature
|
|
1.Thickening spring design: The
hardness of spring is better than that of ordinary spring,
|
|
vibration sensing effect is better,
and the spring is more durable after thickening.
|
|
2.High quality copper core motor:
Quality assurance, long service life, not easy to break
|
|
down, thick copper wire design, more
stable and worry saving.
|
|
3.Thickened table top anti-corrosion
treatment: It is made of thickened steel, painted,
|
|
anticorrosive and rustproof, which
prolongs the service life of the vibration table.
|
|
Installation and
maintenance
|
|
1.The foundation should be laid before
the vibration table is installed (Use level ruler ) ,
|
|
according to the position
of the bottom frame bolt hole fixed bolts, fixed bolts must be
|
|
tightened and fixed.
|
|
2.When the vibration table
is installed and the machine is debugged, start the machine
|
|
for
|
|
3-5 minutes and then stop.All fixed
bolts shall be inspected and tightened before use if
|
|
loose.
|
|
3.The concrete products should be
stabilized on the vibration table during the process of
|
|
vibration. The required
vibration-compacted products should be placed symmetrically
|
|
with the vibration table to balance
the load. The fastening device of vibration-
|
|
compacted products can be designed and
allocated by users according to their own
|
|
needs.
|
|
4.The bearing of the vibrator should
be checked frequently and cleaned regularly to
|
|
replace the lubricating oil.
Keep the bearing well lubricated and prolong the service life
|
|
of the vibrator.
|
|
NOTICE
:The paint on the machine is slightly off, but the effect is not
affected
The machine is 220V and does not have a plug. The power line is not divided into neutral line and live line, and can be directly connected to the air switch.
|
|
|
|
|
|
|
|
